This is the main channel for public webinars

Wingtra (english)

You face constant pressure to move dirt quickly while keeping track of volumes. Less accurate measurements and outdated surveys are always threatening to throw your earthworks budgets off, by a lot.

But it takes time to get good data, and it’s hard to get it often enough, and safely on active sites.

We built **SURVEY61** to solve this. It delivers <0.1ft / <3cm accuracy without the need to lay down GCPs, so you can capture reliable volumes faster, more often and with less disruption.

**We know it's a bold claim,** but we’ve tested it out, and we’re excited to present the tech behind it and answer all your questions live.

**Join us to learn about:**

*   What's different about this payload, and how the tech enables GCP-free accuracy 
*   Reducing labor time by up to 60% via reducing ground setup from your workflow
*   Cutting volumetrics cost variance by up to 70% with repeatable, survey-grade accuracy
*   Rigorous testing that proves accuracy and repeatability, and data you can process yourself
*   Surveying up to 400 acres (160 hectares), or 4 linear miles (6 kilometers) per field hour
*   Flying over active sites via Category 3 OOP approved in the US, and C6-mark in Europe


SURVEY61: Discover the tech behind the new GCP-free workflow and 6x faster surveys

Highway jobs run faster and smoother with frequent GIS data covering active areas. But getting it faster with drones means a lot of paperwork, road shutdowns, technical steps and complex toolchains that make adoption hard. This is changing. With **WingtraRAY and its end-to-end workflow**, the **entire highway lifecycle** is covered with one platform that’s cleared for operations over people (OOP). Start getting data right away, no waivers, with **LIDAR** and \*\*MAP61 \*\*for pre-con and progress tracking. Then optimize maintenance with **INSPECT** for mm-level post-con pavement checks. Everything flows straight into **WingtraCLOUD**, so **pilots, survey leads, project managers, and field teams** work with the same, up-to-date data. 

Join us for a practical discussion featuring direct insight from case studies and workflows covering: **pre-construction,** **construction, post-construction** and\*\* maintenance\*\*.

You’ll see how to cut a lot of project overhead with:

*   No more traffic shutdowns—waiver-free OOP with complete peace of mind 
*   Reduced errors and rework
*   Shorter learning curves
*   Smoother reporting
*   Faster reconciliations


Keep highway jobs on-track: pre-con to close-out with one aerial platform

Pavement cracks are important to catch early. Detecting them has been slow and expensive, until now. With the launch of the fastest mapping drone on the market, WingtraRAY, came the new 61MP Wingtra INSPECT payload. **This powerful combo can map 95% of US runways for crack detection in a single flight.**

To give you more efficiency, Wingtra has teamed up with gNext for a complete workflow, from setup to analytics. Join Wingtra and gNext for a live discussion to share all the details of this exciting new era of mm-level inspection.

**Here's what you'll take away:**

*   How to map an entire runway in under 2 hours with 2 crew members
*   How INSPECT compares to other methods and sensors on the market
*   How to minimize crack inspection survey overhead, especially infrastructure closure costs
*   Examples of why having one drone supporting several payloads is a big advantage for infrastructure inspections
*   How Wingtra and gNext empower a truly end-to-end workflow, including analytics in a few clicks

 

 


INSPECT and gNext: Set up, fly and deliver large-area crack inspections in a few clicks

More survey teams are staying on track, on budget and out of conflict with drones. With accuracy and tech hassles out of the way, they can take on more projects, put resources to better use and keep a competitive edge. Want to hear their real stories?

Join Hunter Morgan, UAS/Remote Sensing Project Coordinator at WSP, and Ken McDonald, GIS Analyst and Drone Pilot at Mac3GIS, as they talk about LIDAR and RGB data collection over demanding earthworks projects and share deeper insights about:

-How to capture, process and deliver data on the same day

-Running reliable LIDAR and RGB grading and volumetrics surveys just like the day before

-What LIDAR density is optimal for more efficient surveys of bear earth and limited vegetation

-Getting data that offers accurate volume difference reports for tighter planning

-Why day-to-day, back-to-back surveying matters to achieve project goals

-Recent advances in drone tech that cut adoption headaches and save even more time

 


[Expert panel] How drones are driving 3X more efficient cut and fill workflows right now

Built for professionals who can’t afford rework or delays, WingtraRAY helps you map every acre faster and reduce overhead while delivering survey-grade results with confidence.

**Why should you watch this webinar?**

As a surveyor, you deal with tight deadlines, complex terrain, and unpredictable weather. On top of that, if data isn’t right the first time, you have to go back out into the field and get it again.

Add to this regulatory hurdles—like OOP waivers and the hassle of switching between tools—and even simple jobs start to feel like a time sink.

WingtraRAY solves these problems in one platform. It’s a cost-effective tool designed for fast setup, wide coverage, and legal flights over people. Swap payloads in seconds and capture reliable, compliant data—without juggling multiple systems or risking rework.

**What you'll take away from this one hour:**

*   How to map up to 1360 acres in one hour and share results the next day with a simple link
*   How to take on 2–3x more jobs thanks to operations over people—no waivers needed in 9/10 projects in the US
*   How to scale your operations with an intuitive, end-to-end solution that’s easy to implement and operate, even for entry-level surveyors
*   How to cover any job—from mm-level airfield crack detection to LIDAR-based DTM models of forests—just by swapping the payload


Cut costs, unlock flight over people and run aerial surveys with peace of mind

A successful drone service provider, Brian Layhew, was working with leading engineering firms around Chicago. But like so many, **his whole business was based on DJI**. As regulations tightened about Chinese drones in the US, he decided to explore options.With its VTOL design, the WingtraRAY was so different from the quads he was used to, and Brian was skeptical. But he took the leap, and he discovered **it was more than just a good fallback**. 

## **Within one month of unboxing WingtraRAY, he was able to:**

*   Take on a 6000-acre project
*   Turn 3 ½ weeks of flying into a 10-hour job
*   Get a down payment on future work from the same client
*   Line up projects he never thought possible, like extensive OOP mapping of the Chicago suburbs

## **Bring your questions for Brian and learn more about:**

*   What to look out for as you're replacing your DJI-based business and workflows
*   What to expect when switching from DJI to Wingtra: flying without FPV, RTK to PPK, coverage, battery workflow, compliance, etc.
*   How to take advantage of a versatile surveying platform for volumetrics, mm-level inspections, large urban areas, long active corridors - and more!
*   The increasing demand for drone survey data across projects and urban areas

Brian is a living example of **turning a crisis into an opportunity**, taking advantage of how far survey drone technology has advanced while 80% of the marketplace was focused on DJI.

Now’s your chance to hear his story and get answers to your questions in a live setting.
